Skip to content

PAGE separation of small RNAs

For the resolution of RNAs between 15 and 500 nucleotides in length, depending on the percentage acrylamide used.

Materials

Formamide buffer (0.01M EDTA, 0.1% bromophenol blue, deionised formamide)

Gel set-up

PAGE small RNAs tableNB: bromophenol blue migration and run time based on an 8×5 cm mini-gel

  1. Put together the running assembly, fill with 0.5x TBE, remove the comb and clean the wells with running buffer
  2. Pre-run the gel for 1 hour at 300 V

Sample preparation & gel running

  1. Resuspend 1 μg RNA in 2.5 μl ddH2O (RNAse-free) and add 7.5 μl formamide buffer
  2. Denature at 65°C for 15 minutes, spin briefly, place on ice; load samples taking care not to overflow into neighbouring wells
  3. Run gel at 300 V or until the dye front runs off the gel

Staining & transfer

  1. Remove the gel from the assembly and place in 0.5x TBE containing 50ng/ml ethidium bromide for 10 minutes; de-stain in 0.5x TBE for 10 minutes
  2. Transfer to positively charged nylon membrane (e.g. Zeta membrane, Bio-Rad) using a semi-dry electroblotter (e.g. transblotter, Bio-Rad)
  3. Pre-soak the membrane and two pieces of extra thick filter paper in 0.5x TBE for 10 minutes
  4. Set-up the transfer stack (bottom: filter paper, membrane, gel, filter paper: top) and transfer for 1 hour at 250 mA
  5. Cross-link in a Stratalinker or similar

Pre-hybridise and hybridise as per standard northern protocol

Comments are closed.